| What are ICFs? |  | Product Range | | LOGIX6 |
|
 |
|
|
| All forms in the LOGIX6 Range are made from fire retardant, white, EPS foam ( Minimum density 25kg/m3). |
| The concrete core width is 158mm, and the overall width is 298mm. |
| The thermal resistance (K) of the standrard forms, exluding finishes, but including concrete is 4.2. When combined with plasterboard, and a a rendered finish this equates to a U value of 0.23w/m2k. With Neopor this is improved to 0.19-0.20, dependant on finish. |
Listing Products 1 to 8 of 15 |
|
|
|
|
|
|
|
Standard Form: LOG601(N) |
| A Straight form with recyclced polypropylene webs providing a fixing surface, for the full height of the form, spaced every 203mm (8"). |
| Wall Area |
0.495m2 |
| Concrete Volume |
79L |
| Weight (approx) 3KG | | |
|
|
|
|
|
|
|
|
| Half Height Form: LOG602(N) |
| The same as the Standard form, only half the height. Used to adjust wall heights, with less cutting. |
| Wall Area |
0.247m2 |
| Concrete Volume |
39L |
| Weight (approx.) |
2KG | | |
|
|
|
|
|
|
|
|
| Left Hand Corner Form: LOG604L(N) |
| Preformed corner unit, complete with corner reinforcement for unrivalled strength, and for securing finishes. Preformed corners help speed up the build, and ensure your walls are built at square. |
| External Wall area |
0.498m2 |
| Concrete Volume |
70L |
| Weight (approx) 2.8kg |
| NB. Also available as a Half Height version: LOG607L | | |
|
|
|
|
|
|
|
|
| Right Hand Corner Form: LOG604R(N) |
| Preformed corner unit, complete with corner reinforcement for unrivalled strength, and for securing finishes. Preformed corners help speed up the build, and ensure your walls are built at square. |
| External Wall area |
0.498m2 |
| Concrete Volume |
70L |
| Weight (approx) 2.8kg |
| NB. Also available as a Half Height version: LOG607L | | |
|
|
|
|
|
|
|
|
| End Cap: LOG605(N) |
| Closure piece that slides into the forms to close the open end of a wall, often around windows, and doors. Eliminates thermal bridging, and allows can eliminate the need for window supports during concrete placement. Can also be used to closes the forms at lintels and sills. |
| External Wall area |
n/a |
| Concrete Volume |
n/a |
| Weight (approx) 0.1kg | | |
|
|
|
|
|
|
|
|
|
Brick Ledge (or Corbel): LOG605(N) |
| A Straight form which gets larger towards the top, providing a bearing surface for a brick / stone finish, or for hanging top chord floor joists from. |
| Wall Area |
0.495m2 |
| Concrete Volume |
85L |
| Weight (approx) 3.5KG | | |
|
|
|
|
|
|
|
|
|
Taper Top: LOG608(N) |
| A Straight form where the concrete core gets wider towards the top on one side, without affecting the overall width. This provides an extra 44mm of bearing surface for floor joists/beams. |
| Wall Area |
0.495m2 |
| Concrete Volume |
82L |
| Weight (approx) 3KG | | |
|
|
|
|
|
|
|
|
|
Double taper Top: LOG605 |
| Similar to the taper top, but the extra bearing surface is created on both sides, making it ideal for party walls, with joist/beams on both sides. |
| Wall Area |
0.495m2 |
| Concrete Volume |
84L |
| Weight (approx) 3.0KG | | |
|
|
|
|
|
